393 lines
8.9 KiB
C++
393 lines
8.9 KiB
C++
/*******************************************************************************
|
|
Titre : OpenCR
|
|
Date : 6 février 2019
|
|
Auteur : Maxime Desmarais-Laporte
|
|
Descritpion :
|
|
|
|
Specifications :
|
|
Baud for motors : 57600 b/s
|
|
Adress for motors : 11 and 12 and 13
|
|
*******************************************************************************/
|
|
#include <DynamixelWorkbench.h>
|
|
|
|
#if defined(__OPENCM904__)
|
|
#define DEVICE_NAME "3"
|
|
#elif defined(__OPENCR__)
|
|
#define DEVICE_NAME ""
|
|
#endif
|
|
|
|
#define STRING_BUF_NUM 64
|
|
#define MINTICK 0
|
|
#define MAXTICK 1048575
|
|
|
|
// 0 = not reverse, 1 = reverse
|
|
uint8_t X_REVERSE = 0;
|
|
uint8_t Y_REVERSE = 1;
|
|
uint8_t Z_REVERSE = 0;
|
|
|
|
const String HOMING_OFFSET = "Homing_Offset";
|
|
const String OPERATING_MODE = "Operating_Mode";
|
|
const String PRESENT_POSITION = "Present_Position";
|
|
const String GOAL_POSITION = "Goal_Position";
|
|
|
|
String cmd[STRING_BUF_NUM];
|
|
|
|
DynamixelWorkbench dxl_wb;
|
|
uint8_t get_id[16];
|
|
uint8_t scan_cnt = 0;
|
|
uint8_t ping_cnt = 0;
|
|
|
|
const char *NULL_POINTER = NULL;
|
|
|
|
bool isEmegencyState = false;
|
|
|
|
// Motors Propertys :
|
|
uint8_t idX = 11;
|
|
uint8_t idY = 12;
|
|
uint8_t idZ = 13;
|
|
|
|
// Mecanicals propertys:
|
|
const float pouleyPitch = 2; //mm
|
|
const int nbTheets = 20;
|
|
const int resMotorTick = 4096; //Ticks per revolution
|
|
|
|
int32_t tickFromMm = resMotorTick/(pouleyPitch*nbTheets);
|
|
|
|
// Limit Switch propertys
|
|
const int xSwitchPin = 8;
|
|
const int ySwitchPin = 9;
|
|
const int zSwitchPin = 10;
|
|
const int emergencySwitchPin = 2; // intrupt pin
|
|
|
|
// Homing variables
|
|
bool homing = false;
|
|
|
|
const int homeOffsetX = 10*tickFromMm;
|
|
const int homeOffsetY = 10*tickFromMm;
|
|
const int homeOffsetZ = 10*tickFromMm;
|
|
|
|
// Fonctions prototypes :
|
|
void Begin(uint32_t baud);
|
|
void Ping(int identification);
|
|
void Scan();
|
|
void Joint(uint8_t id, uint16_t goal);
|
|
void Wheel(uint8_t id, int32_t goal);
|
|
void Torque_on(uint8_t id);
|
|
void Torque_off(uint8_t id);
|
|
void Write(uint8_t id, uint32_t value, String commande);
|
|
int32_t Read(uint8_t id, String commande);
|
|
void Led(uint8_t id, bool state);
|
|
void TorqueOffAll();
|
|
void OffsetAxe(uint8_t id, int offset);
|
|
void LimiteSwitch();
|
|
int MovingTick(uint8_t id, int32_t value);
|
|
int Homing();
|
|
int HomingAxis(uint8_t id, int speed, int switchPin, int offset);
|
|
uint8_t getIdFromChar(char letter);
|
|
|
|
// Initialisation :
|
|
void setup()
|
|
{
|
|
|
|
// Initialisation des pins :
|
|
pinMode(xSwitchPin, INPUT_PULLUP);
|
|
pinMode(ySwitchPin, INPUT_PULLUP);
|
|
pinMode(zSwitchPin, INPUT_PULLUP);
|
|
pinMode(emergencySwitchPin, INPUT_PULLUP);
|
|
attachInterrupt(digitalPinToInterrupt(emergencySwitchPin), LimiteSwitch, FALLING);
|
|
|
|
Serial.begin(57600);
|
|
while(!Serial); // Open a Serial Monitor
|
|
|
|
//Motor Initialisation Section :
|
|
Begin((uint32_t)57600);
|
|
Ping(idX);
|
|
Ping(idY);
|
|
Ping(idZ);
|
|
Scan();
|
|
|
|
delay(1000);
|
|
|
|
Torque_off(idX);
|
|
Torque_off(idY);
|
|
Torque_off(idZ);
|
|
|
|
Write(idX, 4, OPERATING_MODE);
|
|
Write(idY, 4, OPERATING_MODE);
|
|
Write(idZ, 4, OPERATING_MODE);
|
|
|
|
Write(idX, 0, HOMING_OFFSET);
|
|
Write(idY, 0, HOMING_OFFSET);
|
|
Write(idZ, 0, HOMING_OFFSET);
|
|
|
|
dxl_wb.writeRegister(idX, 10, 1, & , &NULL_POINTER);
|
|
dxl_wb.writeRegister(idY, 10, 1, &Y_REVERSE, &NULL_POINTER);
|
|
dxl_wb.writeRegister(idZ, 10, 1, &Z_REVERSE, &NULL_POINTER);
|
|
|
|
Torque_on(idX);
|
|
Torque_on(idY);
|
|
Torque_on(idZ);
|
|
}
|
|
|
|
// Main Program
|
|
void loop()
|
|
{
|
|
if(isEmegencyState)
|
|
setEmergency();
|
|
|
|
if (Serial.available())
|
|
{
|
|
String read_string = Serial.readStringUntil('\n');
|
|
if(!isEmegencyState)
|
|
{
|
|
String words[] = {"", "", ""};
|
|
|
|
int start = 0;
|
|
int wordIndex = 0;
|
|
int statut[3] = {0, 0, 0};
|
|
|
|
for(int i = 1; i < read_string.length(); i++)
|
|
{
|
|
if(read_string.charAt(i) == ' ')
|
|
{
|
|
words[wordIndex++] = read_string.substring(start, i);
|
|
start = i+1;
|
|
}
|
|
}
|
|
words[wordIndex] = read_string.substring(start, read_string.length());
|
|
|
|
Serial.println("2");
|
|
|
|
if(words[0] == "G0")
|
|
{
|
|
for(int i = 1; i < wordIndex+1; i++)
|
|
{
|
|
if(words[i].length() > 1)
|
|
{
|
|
float value = words[i].substring(1, words[i].length()).toFloat();
|
|
uint8_t idMotor = getIdFromChar((char)words[i].charAt(0));
|
|
if(idMotor == -1)
|
|
Serial.println("-1");
|
|
else
|
|
statut[i] = MovingTick(idMotor, value*tickFromMm);
|
|
}
|
|
else
|
|
Serial.println("-1");
|
|
}
|
|
if((statut[0] == 1 || statut[0] == 0) && (statut[1] == 1 || statut[1] == 0) && (statut[2] == 1|| statut[2] == 0)){
|
|
Serial.println("1");
|
|
}
|
|
else{
|
|
Serial.println("-1");
|
|
}
|
|
}
|
|
|
|
else if(words[0] == "G28"){
|
|
Serial.println(Homing());
|
|
}
|
|
else if(words[0] == "M18"){
|
|
TorqueOffAll();
|
|
Serial.println("1");
|
|
}
|
|
else if(words[0] == "M112"){
|
|
setEmergency();
|
|
|
|
Led(idX, 1);
|
|
Led(idY, 1);
|
|
Led(idZ, 1);
|
|
|
|
Serial.println("1");
|
|
}
|
|
else if(words[0] == "M1")
|
|
{
|
|
TorqueOffAll();
|
|
|
|
Write(idX, -Read(idX, PRESENT_POSITION), HOMING_OFFSET);
|
|
Write(idY, -Read(idY, PRESENT_POSITION), HOMING_OFFSET);
|
|
Write(idZ, -Read(idZ, PRESENT_POSITION), HOMING_OFFSET);
|
|
|
|
TorqueOnAll();
|
|
Serial.println("1");
|
|
}
|
|
else
|
|
{
|
|
Serial.println("-1");
|
|
}
|
|
}
|
|
else
|
|
{
|
|
Serial.println("-2");
|
|
}
|
|
}
|
|
}
|
|
|
|
uint8_t getIdFromChar(char letter)
|
|
{
|
|
if(letter == 'X')
|
|
return idX;
|
|
else if(letter == 'Y')
|
|
return idY;
|
|
else if(letter == 'Z')
|
|
return idZ;
|
|
else
|
|
return -1;
|
|
}
|
|
|
|
int Homing()
|
|
{
|
|
int state = 0;
|
|
homing = true;
|
|
|
|
//state += HomingAxis(idZ, -50, zSwitchPin, homeOffsetZ);
|
|
state += HomingAxis(idY, -100, ySwitchPin, homeOffsetY);
|
|
state += HomingAxis(idX, -100, xSwitchPin, homeOffsetX);
|
|
|
|
homing = false;
|
|
return state == 2 ? 1 : -1;
|
|
}
|
|
|
|
int HomingAxis(uint8_t id, int speed, int switchPin, int offset)
|
|
{
|
|
Torque_off(id);
|
|
Write(id, 0, HOMING_OFFSET);
|
|
Torque_on(id);
|
|
Wheel(id, speed);
|
|
while(!digitalRead(switchPin));
|
|
OffsetAxe(id, offset);
|
|
Write(id, 4, OPERATING_MODE);
|
|
return MovingTick(id, 0);
|
|
}
|
|
|
|
void OffsetAxe(uint8_t id, int offset){
|
|
int32_t posPresent = Read(id, PRESENT_POSITION);
|
|
int32_t homePosition = - posPresent - offset;
|
|
Torque_off(id);
|
|
|
|
if(id == idX && X_REVERSE)
|
|
homePosition *= -1;
|
|
else if(id == idY && Y_REVERSE)
|
|
homePosition *= -1;
|
|
else if(id == idZ && Z_REVERSE)
|
|
homePosition *= -1;
|
|
|
|
Write(id, homePosition, HOMING_OFFSET);
|
|
}
|
|
|
|
int MovingTick(uint8_t id, int32_t value){
|
|
int32_t CurrentPosition = Read(id, PRESENT_POSITION);
|
|
bool Forward = value > CurrentPosition;
|
|
|
|
if((Forward && (CurrentPosition < MAXTICK)) || (!Forward && (CurrentPosition > MINTICK)))
|
|
{
|
|
Torque_on(id);
|
|
Write(id, value, GOAL_POSITION);
|
|
}
|
|
else
|
|
{
|
|
Torque_off(id);
|
|
return -1;
|
|
}
|
|
|
|
if(Forward){
|
|
while(CurrentPosition < value-1 && !isEmegencyState){
|
|
CurrentPosition = Read(id, PRESENT_POSITION);
|
|
if(CurrentPosition >= MAXTICK && !homing){
|
|
Torque_off(id);
|
|
return -1;
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
while(CurrentPosition > value+1 && !isEmegencyState){
|
|
CurrentPosition = Read(id, PRESENT_POSITION);
|
|
if(CurrentPosition <= MINTICK && !homing){
|
|
Torque_off(id);
|
|
return -1;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
void LimiteSwitch(){
|
|
if(!homing){
|
|
isEmegencyState = true;
|
|
}
|
|
}
|
|
|
|
void setEmergency()
|
|
{
|
|
TorqueOffAll();
|
|
Led(idX, !digitalRead(xSwitchPin));
|
|
Led(idY, !digitalRead(ySwitchPin));
|
|
Led(idZ, !digitalRead(zSwitchPin));
|
|
}
|
|
|
|
|
|
//########################
|
|
// Low Levels functions :
|
|
//########################
|
|
|
|
void Begin(uint32_t baud){
|
|
if (cmd[1] == '\0')
|
|
cmd[1] = String("57600");
|
|
|
|
dxl_wb.init(DEVICE_NAME, baud);
|
|
}
|
|
|
|
void Ping(int identification){
|
|
get_id[ping_cnt] = identification;
|
|
uint16_t model_number = 0;
|
|
dxl_wb.ping(get_id[ping_cnt], &model_number, &NULL_POINTER);
|
|
}
|
|
|
|
void Scan(){
|
|
uint8_t range = 253;
|
|
dxl_wb.scan(get_id, &scan_cnt, range);
|
|
}
|
|
|
|
void Joint(uint8_t id, int32_t goal){
|
|
dxl_wb.jointMode(id, 0, 0, &NULL_POINTER);
|
|
dxl_wb.goalPosition(id, goal, &NULL_POINTER);
|
|
}
|
|
|
|
void Wheel(uint8_t id, int32_t goal){
|
|
dxl_wb.wheelMode(id, 0, &NULL_POINTER);
|
|
dxl_wb.goalVelocity(id, goal, &NULL_POINTER);
|
|
}
|
|
|
|
void Torque_on(uint8_t id){
|
|
dxl_wb.torqueOn(id, &NULL_POINTER);
|
|
}
|
|
|
|
void Torque_off(uint8_t id){
|
|
dxl_wb.torqueOff(id, &NULL_POINTER);
|
|
}
|
|
|
|
void Write(uint8_t id, uint32_t value, String commande){
|
|
dxl_wb.writeRegister(id, commande.c_str(), value, &NULL_POINTER);
|
|
}
|
|
|
|
int32_t Read(uint8_t id, String commande){
|
|
int32_t data = 0;
|
|
dxl_wb.readRegister(id, commande.c_str(), &data, &NULL_POINTER);
|
|
return data;
|
|
}
|
|
|
|
void Led(uint8_t id, bool state){
|
|
Write(id, (uint32_t)state, "LED");
|
|
}
|
|
|
|
void TorqueOffAll(){
|
|
Torque_off(idX);
|
|
Torque_off(idY);
|
|
Torque_off(idZ);
|
|
}
|
|
|
|
void TorqueOnAll(){
|
|
Torque_on(idX);
|
|
Torque_on(idY);
|
|
Torque_on(idZ);
|
|
}
|