Add readme file and rename path in the others readme files

devicecommunication/README.md

@@ -0,0 +1,39 @@
+# Device Communication
+
+This code is use to communicate with the device
+
+## Getting Started
+
+To use this UI you must have a GCode file to sent to the device unless you want to control manually the device.
+
+### Prerequisites
+
+Since the program is coded in python, you need to install python, we used python 3.7.
+You can use an IDE or cmd to launch the program or the UI.
+
+## Using the program
+
+After downloading the project,
+You can launch CommunicationMain.py in S4-P3-Projet/devicecommunication/ for the user interface of the program.
+
+### Automatic mode
+
+Enter the parameters in the proper boxes:
+
+```
+- The GCode file's path.
+- COM port of the OpenCR (ex: COM8).
+- The communication baudrate of the OpenCR.
+- Maximum communication time in seconds.
+  This is the maximum time to accept an anwser when a command is request.
+- Sleep inital time in seconds. 
+  This is the boot time of the OpenCR. The time to wait before sending the first command.
+```
+Once all parameters are entered, you can click on the **Start** button.
+At the moment everything runs in one thread so the UI is block by the communication
+
+### Manual mode
+
+The manual mode uses the values entered in the Auto tab so be sure the COM port is specified.
+At the moment all +/- buttons dont move the motors in a relative movement. 
+Hence it's better to use the text field to move the mototrs

gcodeextractor/README.md

@@ -1,4 +1,4 @@
-# PCB Device
+# GCode Extractor
 
 This program transforms a pcb drawing into a gcode.
 
@@ -16,7 +16,7 @@ You can use an IDE or cmd to launch the program or the UI.
 ### Using the program
 
 After downloading the project,
-You can launch UI.py in S4-P3-Projet/pcbdevice/UI/ for the user interface of the program.
+You can launch UI.py in S4-P3-Projet/gcodeextractor/UI/ for the user interface of the program.
 
 Enter the parameters in the proper boxes: